Ceramic Car Receiver Glonass External Sma Magnetic Module Gps
Active Antenna
PRODUCT INFORMATION
Specification
1. Mechanical Specification
Connect Type...................................... SMA-J
Work Temperature............................... -40~85℃
Storage Temperature........................... -40~85℃
Specification of antenna......................... 75×75mm
Specification of cable............................. RG178×200mm
2. Electrical Specification
Frequency Range........................................
914.5～930.5MHz
VSWR...................................................... <2
Peak Gain....................................................
3.55dBi
Polarization..................................................
circular polarization
Input Impedance................................... 50Ω
Max Input Power............................ 10W
RELIABILITY TEST REPORT
| No. | Item | Test Condition | Remark |
| 1 | Humidity | The device shall be placed in 90%~95% relative humidity and
at 60℃±3℃ for 48h, then place at 25℃±5℃ and less than 65%
relative humidity for 2h | It shall fulfill the
specification |
| 2 | High Temperature | The device shall be placed at 85℃ for 48h, then place at
25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the
specification |
| 3 | Low Temperature | The device shall be placed at -40℃ for 48h, then place at
25℃±5℃ and less than 65% relative humidity for 2h | It shall fulfill the
specification |
| 4 | Temperature
Cycle | The device shall be placed at -40℃ for 30 min then at 85℃ for
30 min. Cycling shall be repeated 5 times. At the room
temperature for 1h | It shall fulfill the
specification |
| 5 | Salt Spray Test | The device shall be placed in salt spray box (5% NaCl) at
25℃±5℃ for 24h. | It shall fulfill the
specification |
| 6 | Vibration Test | The device shall be subjected to vibration for 2h each in x,y
and z axis with the amplitude of 1.5mm, the frequency shall be
varied uniformly between the limits of 10Hz~55Hz. | It shall fulfill the
specification |
| 7 | IP5X Test | The device shall be placed in the dust test machine, dust
blowing mode, at 35℃ for 4 hours, then turn on dust floating
mode, at 45℃ for 4 hours. | It shall fulfill the
specification |
| 8 | IPX6 Test | The device shall be placed in spray water in all direction.
Nozzle inner diameter 12.5mm, water flow 100±5L/min, for
3min | It shall fulfill the
specification |
PRODUCT PICTURE
PRODUCT CATEGORY
Our Main prouct is Wifi antenna, GPS antenna, GNSS antenna, 433mhz
antenna, PCB antenna, FPC antenna, 4G lte antenna and so on.
OUR ADVANTAGES:
1. All the specifications bellow were customized by customers, we
provide OEM/ODM service.
2. Samples available
3. Fast delivery, high quality and best price.
4. Saintenna have over 10years experience in antenna design and
development.
5. Saintenna have best after-sale service
1. Payment available: 100% T/T, Western Union, Paypal and so on.
2. Country of origion: Shanghai, China
3. Delivery terms: By sea or air or express( EMS, DHL, UPS, FedEx,
TNT and so on)
